MasterKure 106

MasterKure 106 is a solvent free, membrane forming wax emulsion, suitable for spray application to freshly poured concrete. The resultant film retains sufficient moisture in the concrete to ensure full hydration of the cement; essential for optimum strength development. Membrane cured concrete is typically harder and exhibits a dust free surface with a reduced incidence of drying shrinkage cracks. The film can also act as a bond breaker between initial and subsequent concrete pours.

MasterKure 181

MasterKure 181 is a non-degrading, membrane- forming liquid based on acrylic resin suitable for spray application to freshly poured concrete. MasterKure 181 is available as a clear opaque liquid and white solar reflective version. The resultant film retains sufficient moisture in the concrete to ensure full hydration of the cement; essential for optimum strength development. The cured concrete is typically harder and exhibits a dust free surface with a reduced incidence of drying shrinkage cracks. Additionally, the membrane acts as a primer system for many subsequent surface finishes that do not rely on penetration for substrate bond. When applied to floors, the MasterKure 181 seals and dustproofs the surface, eliminating the primary source of abrasion and enhancing durability.

MasterPozzolith 40LD

MasterPozzolith 40LD is a versatile product which can be utilised to maintain workability and effect water reduction throughout a range of concrete mix designs and ambient temperature conditions. MasterPozzolith 40LD is a multi-role admixture capable of functioning as a water reducer to enable strength gains, whilst maintaining workability or set retardation.

MasterCast 121

MasterCast 121 is multi role bonding agent and admixture for cementitious systems.

MasterPozzolith RMC4

MasterPozzolith RMC 4 is a high-performance plasticising retarder, beneficial in maintaining workability especially in high ambient temperatures.

MasterFinish 202

Chemical release mould and shutter faces prior to casting concrete in order to achieve a clean release. After removal of the formwork, the resultant concrete has a smooth, hard, uniform finish, with reduced incidence of blow holes. MasterFinish 202 can be applied to the formwork by spray in the form of a light uniform mist coating.

MasterKure 111

MasterKure 111 evaporation retardant helps produce high quality, concrete (slab) and reduces surface moisture evaporation. Because MasterKure 111 retards evaporation, it is especially effective in combating rapid drying conditions (high concrete and / or ambient temperatures, low humidity, high winds, direct sunlight, work in heated interiors during cold weather, etc.).

MasterGlenium 54

MasterGlenium 54 has been developed for applications primarily in precast but also readymix concrete industries where the highest durability and performance is required.

MasterFiber 012

MasterFiber 012 is a high performance monofilament polypropylene fibre developed as a crack controlling additive for concrete and mortar. MasterFiber 012 is supplied agglomerated in flakes bound by a water soluble adhesive.

MasterPozzolith 55R

MasterPozzolith 55R is a powerful plasticiser which disperses and deflocculates cement particles whilst delaying the hydration process, thereby retarding the initial and final set. It can be used to improve workability without the addition of extra water, or to allow reductions in the free water content. Due to improved dispersion of the cement particles the process of hydration proceeds under the optimum conditions, leading to improved strength characteristics with or without reduction in free water.

MasterKure 107

MasterKure 107 incorporates a white pigment which at recommended coverage rates gives a daylight reflectance value of 60-80%. This permits a high curing efficiency to be maintained even in conditions of intense ambient light. MasterKure 107 is a solvent free, membrane forming wax emulsion, suitable for spray application to freshly poured concrete. The resultant film retains sufficient moisture in the concrete to ensure full hydration of the cement; essential for optimum strength development. Membrane cured concrete is typically harder and exhibits a dust free surface with a reduced incidence of drying shrinkage cracks.

MasterGlenium ACE 30

MasterGlenium ACE 30 is an innovative latest generation of polycarboxylic ether polymers superplasticizer. The particular molecular configuration of MasterGlenium ACE 30 accelerates the cement hydration. Rapid adsorption of the molecule onto the cement particles, combined with an efficient dispersion effect, exposes increased surface of the cement grains to react with water. As a result of this effect, it is possible to obtain earlier development of the heat of hydration, rapid development of the hydration products and, as a consequence, higher strengths at very early age.

MasterFinish RL 225

A ready to use water based, safe, effective release agent which is friendly to the environment. MasterFinish RL 225 is applied to mould and shutter faces prior to casting concrete in order to achieve a clean release. After removal of the formwork, the resultant concrete has a smooth, hard, uniform finish, with reduced incidence of blow holes. MasterFinish RL 225 can be applied to the formwork by spray in the form of a light uniform mist coating.

MasterGlenium 183

MasterGlenium 183 is an innovative latest generation superplasticizer based on polycarboxylic ether (PCE) polymers and is specially engineered for ready-mix concrete. MasterGlenium 183 is differentiated from conventional superplasticisers, such as those based on sulphonated naphthalene formaldehyde condensate in that it is based on a unique carboxylic ether polymer with long lateral chains. This greatly improves cement dispersion. At the start of the mixing process the same electrostatic dispersion occurs but the presence of the lateral chains, linked to the polymer backbone, generate a steric hindrance which stabilises the cement particles capacity to separate and disperse. This mechanism provides flowable concrete with greatly reduced water demand.

MasterCast 141

MasterCast 141 is a white liquid (SBR) styrene- butadiene co-polymer latex, specifically designed for use with Portland cement mixes. The latex consists of microscopic particles of synthetic rubber dispersed in an aqueous solution. It is used as an admixture in mortar and concretes to improve compressive and flexural strengths, improve bond increase resistance to water penetration, improve abrasion resistance and durability. It is used with Portland cement as a reliable water-resistant bonding agent.

MasterKure 181S

MasterKure 181S is a non-degrading, membrane- forming liquid based on silane siloxane resin suitable for spray application to freshly poured concrete. The resultant film retains sufficient moisture in the concrete to ensure full hydration of the cement; essential for optimum strength development. The cured concrete is typically harder and exhibits a dust free surface with a reduced incidence of drying shrinkage cracks. Additionally, the membrane acts as a primer system for many subsequent surface finishes that do not rely on penetration for substrate bond. When applied to floors, the MasterKure 181S seals and dustproofs the surface, eliminating the primary source of abrasion and enhancing durability.

MasterLife WP 3760

MasterLife WP 3760 crystalline waterproofing powder admixture is an integral crystalline capillary waterproofing admixture for concrete. It is designed for use in above- and below-grade applications. MasterLife WP 3760 consists of Portland cement, very fine treated silica sand and various active, proprietary chemicals. These active chemicals react with the moisture in fresh concrete with the by-products of cement hydration to cause a reaction, which generates an insoluble crystalline deposit throughout the pores and capillary tracts of the concrete. Thus, the concrete with MasterLife WP 3760 reduces water permeability. This product also has a selfhealing property under presence of moisture and can heal cracks below 0.4 mm.

MasterKure 101

MasterKure 101 is a solvent free non-degrading, membrane-forming liquid curing compound based on an acrylic resin emulsion suitable for spray application to freshly poured concrete. The resultant film retains sufficient moisture in the concrete to ensure full hydration of the cement; essential for optimum strength development. The cured concrete is typically harder and exhibits a dust free surface with a reduced incidence of drying shrinkage cracks. Additionally, the membrane acts as a primer system for many subsequent surface finishes that do not rely on penetration for substrate bond. When applied to floors, the MasterKure 101 seals and dustproofs the surface, eliminating the primary source of abrasion and enhancing durability.

MasterRheobuild 850

MasterRheobuild 850 is formulated from synthetic polymers specially designed to impart rheoplastic qualities to concrete. A rheoplastic concrete is a fluid concrete with a slump of at least 200mm, easily flowing, but at the same time free from segregation and having the same water/cement ratio as that of a low slump concrete (25mm) without admixture. MasterRheobuild 850 is chloride free.

(+971) 4 4214636

info@revaintl.comOffice 407, Building 12, Bay Square,
Business Bay – Downtown Dubai, UAE

Reva International is a global trading and distribution company with a network of offices in Africa, Asia, Gulf, and Europe. We leverage our worldwide presence along with sourcing and marketing competencies to deliver what we promise. We deal in Construction Chemical Products.