Polymer

MasterEmaco N 907

MasterEmaco N 907 is a two-component acrylic polymer modified blow hole filler and reprofiling mortar. It can be applied up to 10 mm. MasterEmaco N 907 can be used as a skim coat prior to application of protective coatings. MasterEmaco N 907 is specially formulated to produce a shrinkage compensated mortar with no cracking when applied in a thin section. MasterEmaco N 907 is a specially formulated blend of Portland cements, selected aggregates and liquid acrylic in a plastic container. The pre- packed components only require on-site mixing to produce a creamy, easily applied mortar.

Alpha Dry Adhesive

Dry-mix polymer adhesive containing Portland cement, and requiring only water for mixing.

MasterEmaco N 307

MasterEmaco N 307 is a single component acrylic polymer modified repair mortar for use as a "fairing coat" or cosmetic mortar. When mixed with water, as directed, a fine grey trowellable mortar results which can readily be applied to fill in pores, blowholes and blemishes on a concrete surface. MasterEmaco N 307 can be used as a 'skim' coat prior to the application of protective coatings. MasterEmaco N 307 is specially formulated to produce a shrinkage compensating mortar with no cracking when applied in a thin section <5mm.

Alpha Dry Base Coat

Dry-mix polymer adhesive and base coat containing Portland cement, and requiring only water for mixing.

MasterTile 30

MasterTile 30 is a polymer-modified cement- based tile adhesive for thin or thick bed fixing of ceramic tiles in interior or exterior situations, especially those exposed to permanently wet conditions. Suitable substrates are concrete, sand cement screeds and renders, plaster boards, gypsum fibre boards and suitably prepared timber.

MasterTile 15

Polymer modified tile adhesive for non-vitrified and vitrified tiles

MasterTile 4

MasterTile 4 is a cementitious powder formulated as a high performance fixing adhesive for a wide range of applications.

MasterSeal 910

MasterSeal 910 Waterbar is suitable for all construction joints subject to hydrostatic pressure, on one or both sides. MasterSeal 910 provide simple but efficient waterproofing of construction joints. Movements in the joint, e.g. by shrinkage or settlement in the substrate, are taken up by the elastic profile of the MasterSeal 910 Waterbar. MasterSeal 910 has been successfully employed to waterproof joints where an opening of up to 5mm was deliberately created. Water pressure of up to 5 bar was sealed. MasterSeal 910 is based on a newly developed polymer technology providing flexible polymer composites which have high chemical resistance capable of storing water in their molecular structure by increasing their volume. Where previously MasterSeal 910 was available in different grades for various exposure conditions. A single version of MasterSeal 910 now resists deterioration in the following conditions: In fresh water and where the water has a high salt content (sea water, brackish water), in construction with high chemical exposure and/or exposure of solvents, including oils and fuels. MasterSeal 910 is a component of the BASF pile- cap waterproofing and watertight jointing systems. Consult your representative for details.

MasterTile 434

A high performance single component latex polymer modified tile adhesive

MasterTile NTS 26 Rapid

MasterTile NTS 26 Rapid is a cement based, polymer modified, highly stable, high performance, flexible adhesive used in adhesion of natural stones, granites, marbles and glass mosaics, and can also be used to bond ceramics.

MasterTile ECO

MasterTile ECO is an economic cementitious powder formulated as a general purpose adhesive for a wide range of applications.

Ucrete FL

Ucrete FL is a solvent free underlayment screed applied by trowel or screed bar at a thickness of 12 to 100 mm. Ucrete FL is not a finished floor and must be overlaid with the appropriate Ucrete floor finish

MasterSeal 911

MasterSeal 911 is a one component adhesive, based on a modified silane polymer used to secure the MasterSeal 910 swelling gasket to all common substrates in construction.

MasterBrace ADH 4000

MasterBrace ADH 4000 is the adhesive for the MasterBrace LAM system. The MasterBrace LAM system is based on ready to use carbon fibre laminate (pultruded plate) that provides high tensile strength combined with light- weight and is used for flexural reinforcement of concrete and other building materials.

(+971) 4 4214636

info@revaintl.comOffice 407, Building 12, Bay Square,
Business Bay – Downtown Dubai, UAE

Reva International is a global trading and distribution company with a network of offices in Africa, Asia, Gulf, and Europe. We leverage our worldwide presence along with sourcing and marketing competencies to deliver what we promise. We deal in Construction Chemical Products.