Grout

MasterSeal 915

MasterSeal 915 is a high performance, solvent free epoxy resin grouting material for pilecap waterproofing applications.

MasterTile RSG 705

A three-component epoxy resin based adhesive and grouting system for paviours, ceramic and acid resistant tiles, in medium and heavy duty corrosive and hygienic environments.

MasterFlow 190

MasterFlow 190 is a shrinkage compensated pre-bagged powder requiring only the addition of water to produce a fluid and high ultimate strength grout with extended workability retention even at high temperatures.

MasterFlow 524

MasterFlow 524 is a ready to use product in powder form, which requires only the on-site addition of water to produce a non shrink grout of predictable performance.

MasterTile 530

MasterTile 530 is a fine coloured latex modified powder which, when mixed with water, gives a smooth, easily applied creamy paste for clean grouting of ceramic tiles. It sets to a decorative water-resistant finish.

MasterFlow 950

MasterFlow 950 is a ready to use product in powder form, which requires only the on-site addition of water to produce a high strength (compressive strength >90 N/mm2) non-shrink grout of predictable performance.

MasterFlow 916 AN

MasterFlow 916 AN is a two-component polyester resin based anchoring grout, for use with threaded rods only in concrete and masonry.

MasterFlow 936 AN

MasterFlow 936 AN is a two component (3:1) pure epoxy resin based high performance anchoring grout for use in cracked and uncracked concrete under normal as well as seismic conditions (seismic category C1 and C2). Designed for post-installed rebar connection applications, MasterFlow 936 AN offers a very high load-bearing capacity. The system can be installed in percussive and diamond drilled dry, wet and flooded holes.

MasterTile 707

A premium performance two component epoxy resin based adhesive and grout for permanent bedding and grouting of all types of tiles, natural stones and agglomerates.

MasterFlow 400

MasterFlow 400 is a solvent free epoxy resin grout formulated to withstand static and dynamic loads in a wide variety of applications. MasterFlow 400 is suitable for an application thickness range of 20-100mm. The product is three component and easily mixed on site, to a pourable consistency.

MasterFlow 932 AN

MasterFlow 932 AN is a two-component (1:1) pure epoxy resin based high performance anchoring grout for use in cracked and uncracked concrete under normal as well as seismic conditions (seismic category C1). Designed for most demanding structural applications and rebar connections, MasterFlow 932 AN offers high load-bearing capacity.

MasterFlow 648

MasterFlow 648 is an epoxy resin-based precision grout used to secure critical equipment for proper alignment and transmission of static and dynamic loads. With carefully balanced physical properties and excellent resistance to chemical attack, vibration and torque, MasterFlow 648 is formulated for easy installation, with good flow characteristics suitable for pouring or pumping, low dust generation and soap and water cleanup. MasterFlow 648 is available in all regions of the world, supported by trained BASF Construction Chemicals sales and technical personnel with experience in the specification and installation of epoxy grouts on every continent.

MasterFlow 928

MasterFlow 928 is a ready to use product in powder form, which requires only the on-site addition of water to produce a non-shrink grout of predictable performance.

(+971) 4 4214636

info@revaintl.comOffice 407, Building 12, Bay Square,
Business Bay – Downtown Dubai, UAE

Reva International is a global trading and distribution company with a network of offices in Africa, Asia, Gulf, and Europe. We leverage our worldwide presence along with sourcing and marketing competencies to deliver what we promise. We deal in Construction Chemical Products.