Epoxy

MasterTop 1231

MasterTop 1231 is a multi-component, self- smoothing, solvent free, decorative epoxy overlay system designed to provide continuous protection for concrete floors at thicknesses of between 2.0-4.0 mm. For greater thicknesses contact BASF Technical department. The cured material produces a dense, colourful, glossy surface. The product has also been successfully applied to glazed and terrazzo tiles, steel and timber. For applications other than to concrete, please contact your BASF representative.

MasterSeal 915

MasterSeal 915 is a high performance, solvent free epoxy resin grouting material for pilecap waterproofing applications.

MasterTile RSG 705

A three-component epoxy resin based adhesive and grouting system for paviours, ceramic and acid resistant tiles, in medium and heavy duty corrosive and hygienic environments.

MasterProtect 1825

MasterProtect 1825 is a protective high build phenol novolac epoxy resin coating specifically developed to protect concrete. Supplied as a two- pack system comprising pigmented base and a hardener, it requires only on site mixing to produce an easily applied decorative and chemically resistant finish.

MasterSeal CR 460

MasterSeal CR 460 is a two-component polyurethane joint sealant. It is pourable and self- levelling. MasterSeal CR 460 is used together with MasterSeal P 460, a two-component clear polyurethane primer.

MasterProtect 1890

MasterProtect 1890 is a multi-component solvent free modified epoxy resin mortar specifically designed to meet the in-service demands of a chemical resistant lining mortar. The selected blend of fillers and resins produce a mortar with exceptional handling properties. The finished cured mortar is highly impervious and combines optimum chemical and mechanical resistance.

MasterSeal 914

MasterSeal 914 is a high-performance non-shrink, solvent-free impermeable flowable epoxy mortar for pile cap surfaces, to ensure the proper transmission of static and dynamic loads to the foundations. These properties combined with its impermeability to moisture, make it ideal for pilecap waterproofing applications.

MasterTop 1205

MasterTop 1205 is a pigmented, solvent-free, high build epoxy floor coating system designed to offer seamless durable floor protection at applied thicknesses between 0.2-0.4mm. With the addition of MasterTop SR 2 or MasterTop SR 3 (slip resistant aggregates) between coats, anti-slip resistant applications can be achieved in system build-up thicknesses between 0.5-1.0mm.

MasterProtect 190

MasterProtect 190 is a two-component solvent free, liquid epoxy polyurethane resin. The superior adhesion and chemical resistance of the epoxy resin, in combination with the flexibility of polyurethane and water-resistant qualities of epoxy produce a system that will provide a high build, ultra dense coating to protect concrete, other cementitious substrates, and metal, against a wide range of aggressive media present in the sewerage environment. The coating will not support the growth of bacteria. MasterProtect 190 in appearance, is smooth, the unique formulation of the system with the aliphatic polyurethane modification exhibit some degree of the flexibility and better resistance to U.V. MasterProtect 190 is high gloss in finish, heavy bodied, ultra dense surface. Hygienic and easily cleaned. Standard colours are light grey, dark grey, black, white, red, green and blue.

MasterProtect 1810

MasterProtect 1810 is a fast setting, repair compound, ideal for minor concrete repair applications such as pin holes, blow holes & fine surface cracks. MasterProtect 1810 is easily worked and can be applied by trowel, spatula or scraper. It cures to give high chemical & mechanical properties typical of Novolac systems. It is resistant to oils, greases, petroleum, salts, many acids and alkalis and most commonly met corrosive media. It does not shrink on curing, and is designed to be used when cured from below freezing point to 60°C. Its impact resistance, and mechanical strength is greater than that of concrete.

MasterTop BC 304

MasterTop BC 304 is a solvent-free four component epoxy terrazzo floor screed combining brightly coloured pigmented epoxy resin with coloured glass, graded aggregates and mother of pearl to provide a durable yet highly decorative flooring system.

MasterProtect 1812

A solvent-free, highly chemical resistant non- carcinogenic coating. In appearance, MasterProtect 1812 is smooth and glossy.

MasterProtect P 659

A deep penetrating epoxy primer. For use with MasterProtect Protective Coating systems. Primer for use prior to application of MasterProtect 1812 and MasterProtect 1825.

MasterTop P 651

MasterTop P 651 is a high grade; high-build, three-component epoxy primer and surface sealer. MasterTop P 651 is used as a sealer or scratch coat with, and without, the addition of quartz sand.

MasterBrace ADH 1441

MasterBrace ADH 1441 is an epoxy resin based bonding system available in two grades for use in two different ranges of concrete surface temperature. MasterBrace ADH 1441W for 5-30°C MasterBrace ADH 1441S for 25-50°C Both the grades are two-part systems. The two parts are distinctly coloured to facilitate proper mixing - a white coloured Base and a black coloured Reactor, which on correct mixing in the ratio, yields a uniformly grey coloured bonding paste.

MasterProtect 2020

MasterProtect 2020 is a three-component solvent free epoxy resin mortar. The specially selected fillers and resins form an easily finished impervious mortar with high build characteristics combined with optimum chemical and mechanical resistance.

MasterEmaco P 102

MasterEmaco P 102 is a two-component solvent free primer based upon epoxy resins for use with appropriate epoxy overlays and coatings. It is used to promote the adhesion of toppings / coatings to existing concrete substrates.

MasterProtect 1813

A solvent-free, chemical resistant non- carcinogenic coating. In appearance, MasterProtect 1813 is smooth and glossy.

MasterTile 706

A two-component epoxy resin-based adhesive for permanent bedding of all types of tiles, natural stones and agglomerates.

MasterTop 1230

MasterTop 1230 is a multi-component, self- smoothing, solvent free, epoxy overlay system designed to provide continuous protection for concrete floors at thicknesses of between 2.0-4.0 mm. For greater thicknesses contact BASF Technical department. The cured material produces a dense, colourful, glossy surface. The product has also been successfully applied to glazed and terrazzo tiles, steel and timber. For applications other than to concrete, please contact your BASF representative.

MasterTop 1740

MasterTop 1740 is a multi component floor screed system based on water dispersible epoxy resins, designed to provide continuous protection for concrete floors. Applied by trowel in thicknesses of 5mm and above, MasterTop 1740 is also suitable for use as a coving or repair medium, where vapour permeability is required.

MasterTop 1110

MasterTop 1110 is a pigmented two component, water dispersible, epoxy resin coating, designed to provide a hygienic seal to protect concrete, timber and asphalt floors as well as walls and ceilings.

MasterTile 707

A premium performance two component epoxy resin based adhesive and grout for permanent bedding and grouting of all types of tiles, natural stones and agglomerates.

MasterProtect 180

MasterProtect 180 is a protective high build epoxy resin coating specifically developed to protect concrete. Supplied as a two-component system comprising pigmented base and a hardener, it requires only on site mixing to produce an easily applied decorative and chemically resistant finish. MasterProtect 180 can be safely used in areas where contact with foodstuffs is envisaged or for coating potable water storage tanks. It is solvent free and can be used with safety in small rooms or tanks without the need to provide special ventilation. MasterProtect 180 coatings will not support the growth of bacteria.

MasterBrace ADH 2200

MasterBrace ADH 2200 is a non slumping epoxy bedding compound and adhesive. It is a two pack, fine aggregate filled, fast curing material, ideal for a variety of bedding, gap filling and concrete repair applications. MasterBrace ADH 2200 is a stiff but easily workable compound that can be applied by either trowel, spatula or knife. It cures to give high mechanical properties typical of epoxy compounds. It is resistant to oils, greases, petroleum, salts, many acids and alkalis and most commonly met corrosive media. It does not shrink on curing, and is designed to be used when cured from below freezing point to 60°C. Its impact resistance, and mechanical strength is greater than that of concrete. Two-component epoxy-based mortar filled with selected fine aggregate.

MasterTop 1210

MasterTop 1210 is a multi-component solvent free epoxy floor coating system designed to offer continuous seamless floor protection at thicknesses between 1.0-2.0 mm. MasterTop 1210 may be applied to produce either a smooth or profiled finish.

MasterTop 1240T

MasterTop 1240T is a multi-component epoxy mortar system applied in thicknesses of 5mm and above, designed to provide a durable purpose system for floor screeding, coving and floor repair. When used as a floor screed, MasterTop 1240T may be applied by a standard hand trowel or through a conventional floor screed box and may be finished by a power trowel.

MasterTop 1210CP

MasterTop 1210CP is a multi component solvent free epoxy coating system designed for application at a total thicknesses between 1.0-2.0 mm on basement and ground floor car parks, or on intermediate traffic decks exhibiting little or no structural movement. MasterTop 1210CP may be applied to produce a durable medium or heavy-duty profiled finish.

MasterInject 1315

A two-component system based on low-viscosity epoxy resins. Ideal for sealing static cracks from widths greater than 100 microns but no more than 9mm. It is highly penetrative and cures to form a permanent and rigid seal against the ingress of corrosive fluids and gases and is capable of restoring structural integrity to concrete elements.

MasterFlow 400

MasterFlow 400 is a solvent free epoxy resin grout formulated to withstand static and dynamic loads in a wide variety of applications. MasterFlow 400 is suitable for an application thickness range of 20-100mm. The product is three component and easily mixed on site, to a pourable consistency.

MasterTop P 650

MasterTop P 650 is a high grade; low-viscosity, two-component epoxy primer and surface sealer. MasterTop P 650 is used as a sealer or scratch coat with, and without, the addition of quartz sand.

MasterBrace ADH 1414

MasterBrace ADH 1414 is a permanent epoxy adhesive for internal or external bonding of renderings, granolithic toppings, and concrete to concrete. It tolerates a degree of moisture before and during curing and is insoluble when cured. The ultimate bond strength is greater than the tensile strength of concrete. MasterBrace ADH 1414 does not shrink and provides an even and stress-free bond.

MasterProtect 185

MasterProtect 185 is a protective high build epoxy resin coating specifically developed to protect concrete. Supplied as a two-component system comprising pigmented base and a hardener in 1:1 by volume to produce an easily sprayable and chemical resistant finish. It is solvent free and can be used with safety in small rooms or tanks without the need to provide special ventilation. MasterProtect 185 coatings will not support the growth of bacteria.

MasterEmaco 8100 AP

MasterEmaco 8100 AP is a single component, solvent borne zinc rich epoxy primer, providing active galvanic protection to steel. It is a thick grey liquid of paint-like consistency, recommended for use where chloride induced attack on steel and concrete is involved.

MasterFlow 648

MasterFlow 648 is an epoxy resin-based precision grout used to secure critical equipment for proper alignment and transmission of static and dynamic loads. With carefully balanced physical properties and excellent resistance to chemical attack, vibration and torque, MasterFlow 648 is formulated for easy installation, with good flow characteristics suitable for pouring or pumping, low dust generation and soap and water cleanup. MasterFlow 648 is available in all regions of the world, supported by trained BASF Construction Chemicals sales and technical personnel with experience in the specification and installation of epoxy grouts on every continent.

MasterTop 1120

MasterTop 1120 is a two-component, solvented, epoxy resin coating specifically designed to provide continuous protection for substrates including concrete and mortar. It may be applied by brush, roller or airless spray.

MasterTop 1200

MasterTop 1200 is a solvent free epoxy used as primer and sealer for MasterTop epoxy flooring systems.

MasterTop 1240

MasterTop 1240 is a multi component epoxy screed system designed to provide durable and abrasion resistant protection for concrete floors. Applied by trowel in thicknesses of 5mm and above, MasterTop 1240 may also be suitable for use as a coving or repair medium.

MasterTop TC 462

MasterTop TC 462 is a solvented two component polyurethane coating which, when applied to MasterTop or MasterSeal systems, produces a UV wear-resistant surface. It is available with a semi-gloss finish.

MasterTop 2200

MasterTop 2200 is an epoxy filler compound. It is a two component, fine aggregate filled, fast curing material, ideal for minor horizontal concrete repair applications. MasterTop 2200 is an easily workable filler compound that can be applied by either trowel, spatula or knife. It cures to give high mechanical properties typical of epoxy compounds. It is resistant to oils, greases, petroleum, salts, many acids and alkalis and most commonly met corrosive media. It does not shrink on curing, and is designed to be used when cured from below freezing point to 60°C. Its impact resistance, and mechanical strength is greater than that of concrete.

(+971) 4 4214636

info@revaintl.comOffice 407, Building 12, Bay Square,
Business Bay – Downtown Dubai, UAE

Reva International is a global trading and distribution company with a network of offices in Africa, Asia, Gulf, and Europe. We leverage our worldwide presence along with sourcing and marketing competencies to deliver what we promise. We deal in Construction Chemical Products.