MasterEmaco N 907

MasterEmaco N 907 is a two-component acrylic polymer modified blow hole filler and reprofiling mortar. It can be applied up to 10 mm. MasterEmaco N 907 can be used as a skim coat prior to application of protective coatings. MasterEmaco N 907 is specially formulated to produce a shrinkage compensated mortar with no cracking when applied in a thin section. MasterEmaco N 907 is a specially formulated blend of Portland cements, selected aggregates and liquid acrylic in a plastic container. The pre- packed components only require on-site mixing to produce a creamy, easily applied mortar.

MasterProtect 1825

MasterProtect 1825 is a protective high build phenol novolac epoxy resin coating specifically developed to protect concrete. Supplied as a two- pack system comprising pigmented base and a hardener, it requires only on site mixing to produce an easily applied decorative and chemically resistant finish.

MasterProtect 1890

MasterProtect 1890 is a multi-component solvent free modified epoxy resin mortar specifically designed to meet the in-service demands of a chemical resistant lining mortar. The selected blend of fillers and resins produce a mortar with exceptional handling properties. The finished cured mortar is highly impervious and combines optimum chemical and mechanical resistance.

MasterEmaco N 307

MasterEmaco N 307 is a single component acrylic polymer modified repair mortar for use as a "fairing coat" or cosmetic mortar. When mixed with water, as directed, a fine grey trowellable mortar results which can readily be applied to fill in pores, blowholes and blemishes on a concrete surface. MasterEmaco N 307 can be used as a 'skim' coat prior to the application of protective coatings. MasterEmaco N 307 is specially formulated to produce a shrinkage compensating mortar with no cracking when applied in a thin section <5mm.

MasterEmaco P 210

MasterEmaco P 210 is a single component white emulsion of milky appearance, based upon modified acrylic resins. It is formulated for use as a bonding agent for cementitious mortars. The product is ready to use, has exceptional grab characteristics and develops a tenacious bond of the new mortar to the host concrete. MasterEmaco P 210 may be used in external or internal applications, but for permanently wet or submerged service conditions the use of MasterCast 141 in a cement bonding slurry is suggested as preferable.

MasterProtect 190

MasterProtect 190 is a two-component solvent free, liquid epoxy polyurethane resin. The superior adhesion and chemical resistance of the epoxy resin, in combination with the flexibility of polyurethane and water-resistant qualities of epoxy produce a system that will provide a high build, ultra dense coating to protect concrete, other cementitious substrates, and metal, against a wide range of aggressive media present in the sewerage environment. The coating will not support the growth of bacteria. MasterProtect 190 in appearance, is smooth, the unique formulation of the system with the aliphatic polyurethane modification exhibit some degree of the flexibility and better resistance to U.V. MasterProtect 190 is high gloss in finish, heavy bodied, ultra dense surface. Hygienic and easily cleaned. Standard colours are light grey, dark grey, black, white, red, green and blue.

MasterProtect FL 100

MasterProtect FL 100 is a ready to use filler for use on all common building surfaces. It gives a high quality, even surface for painting. MasterProtect FL 100 is specifically manufactured for the painter to repair and touch up exterior and interior surfaces, both new and old, prior to painting. It is designed for filling joints, hairline cracks etc. by hand application. Unlike conventional fillers, MasterProtect FL 100 has elastic properties, does not flake off, is permanent and retains its adhesion

MasterProtect 1810

MasterProtect 1810 is a fast setting, repair compound, ideal for minor concrete repair applications such as pin holes, blow holes & fine surface cracks. MasterProtect 1810 is easily worked and can be applied by trowel, spatula or scraper. It cures to give high chemical & mechanical properties typical of Novolac systems. It is resistant to oils, greases, petroleum, salts, many acids and alkalis and most commonly met corrosive media. It does not shrink on curing, and is designed to be used when cured from below freezing point to 60°C. Its impact resistance, and mechanical strength is greater than that of concrete.

MasterProtect 1812

A solvent-free, highly chemical resistant non- carcinogenic coating. In appearance, MasterProtect 1812 is smooth and glossy.

MasterProtect 300

MasterProtect 300 is a high performance elastomeric, waterproof coating based on water borne acrylic co-polymers. It is a single component, ready-to-use material which can be applied by brush, roller or airless spray. When cured, it provides an aesthetic, durable, breathable coating which is waterproof, crack bridging and protects the structure from water-borne aggressive agents such as chloride ions which initiate corrosion in the reinforcing steel and CO2 which reduces the protective properties of the concrete.

MasterProtect P 659

A deep penetrating epoxy primer. For use with MasterProtect Protective Coating systems. Primer for use prior to application of MasterProtect 1812 and MasterProtect 1825.

MasterProtect FL 200

MasterProtect FL 200 is a ready-mixed, pre- bagged blend of acrylic polymers and graded fillers for re-levelling and refurbishment of most internal building surfaces, prior to over coating.

MasterEmaco S 466PM

MasterEmaco S 466PM is a polymer modified high strength precision concrete, requiring only the on-site addition of water to provide a free flowing concrete ideally suited for placing in nominal thicknesses of 40mm and above. When mixed, applied and cured in accordance with the manufacturers instructions, MasterEmaco S 466PM produces a free flowing precision concrete free from segregation and bleeding. MasterEmaco S 466PM is a pre-packaged blend of Portland cement, carefully graded natural aggregate, specially selected sands, fillers, shrinkage control agents and fluidifiers. When mixed with the stated amount of water it produces a free flowing, cohesive, precision concrete that hardens to produce a dense, durable surface.

MasterBrace ADH 1441

MasterBrace ADH 1441 is an epoxy resin based bonding system available in two grades for use in two different ranges of concrete surface temperature. MasterBrace ADH 1441W for 5-30°C MasterBrace ADH 1441S for 25-50°C Both the grades are two-part systems. The two parts are distinctly coloured to facilitate proper mixing - a white coloured Base and a black coloured Reactor, which on correct mixing in the ratio, yields a uniformly grey coloured bonding paste.

WABO CRETE II AE

WABO®CRETE II AE is a three-part polyurethane mortar. Base (PTA) is a low- viscosity clear liquid; Reactor (PTB) is a low- viscosity brown liquid; Aggregate (PTC) is blend of aggregate and fine reactive powders.

MasterProtect 2020

MasterProtect 2020 is a three-component solvent free epoxy resin mortar. The specially selected fillers and resins form an easily finished impervious mortar with high build characteristics combined with optimum chemical and mechanical resistance.

MasterEmaco P 102

MasterEmaco P 102 is a two-component solvent free primer based upon epoxy resins for use with appropriate epoxy overlays and coatings. It is used to promote the adhesion of toppings / coatings to existing concrete substrates.

MasterProtect 1813

A solvent-free, chemical resistant non- carcinogenic coating. In appearance, MasterProtect 1813 is smooth and glossy.

MasterRoc FLC 100

MasterRoc FLC 100 is a chloride free admixture in powder form. It is added at the rate of 6% by weight of cement to produce a flowable, pumpable, non-shrink non-segregating, impermeable grout, providing high strength and high bond to steel. The most important property MasterRoc FLC 100 imparts to grout is the ability to protect cables against corrosion from aggressive agents and stress.

MasterEmaco N 202

MasterEmaco N 202 is a combination of Portland cement, well graded sands and special additives. When mixed with water MasterEmaco N 202 produces a smooth cementitious paste ideally suited to filling of small surface defects and blowholes thin layers of up to 3 mm maximum.

MasterEmaco S 488PM

MasterEmaco S 488PM, is a polymer modified cementitious pre-bagged ready-to-use structural repair mortar in powder form. When mixed with the correct amount of water, it produces a thixotropic, high strength repair mortar, reinforced with acrylic fibres. It possesses excellent bond characteristics to steel reinforcement and to concrete. MasterEmaco S 488PM mortar is shrinkage compensated. It has low permeability and is extremely durable. MasterEmaco S 488PM contains no metallic aggregate and is chloride free. MasterEmaco S 488PM is formulated for sprayed or trowelled applications, in thicknesses up to 50mm in one layer by hand application.

MasterEmaco S 422

MasterEmaco S 422 is a combination of Portland cement, well graded sands, specially selected fibres and additives to improve physical, and installation properties and reduce the possibility of shrinkage cracks When mixed with water MasterEmaco S 422 produces a thixotropic repair mortar, ideally suited to hand, and wet #spray application at 10-40mm thickness.

MasterProtect 180

MasterProtect 180 is a protective high build epoxy resin coating specifically developed to protect concrete. Supplied as a two-component system comprising pigmented base and a hardener, it requires only on site mixing to produce an easily applied decorative and chemically resistant finish. MasterProtect 180 can be safely used in areas where contact with foodstuffs is envisaged or for coating potable water storage tanks. It is solvent free and can be used with safety in small rooms or tanks without the need to provide special ventilation. MasterProtect 180 coatings will not support the growth of bacteria.

MasterBrace ADH 2200

MasterBrace ADH 2200 is a non slumping epoxy bedding compound and adhesive. It is a two pack, fine aggregate filled, fast curing material, ideal for a variety of bedding, gap filling and concrete repair applications. MasterBrace ADH 2200 is a stiff but easily workable compound that can be applied by either trowel, spatula or knife. It cures to give high mechanical properties typical of epoxy compounds. It is resistant to oils, greases, petroleum, salts, many acids and alkalis and most commonly met corrosive media. It does not shrink on curing, and is designed to be used when cured from below freezing point to 60°C. Its impact resistance, and mechanical strength is greater than that of concrete. Two-component epoxy-based mortar filled with selected fine aggregate.

MasterProtect HB 200LR

High-reflective anti-carbonation coating for the protection of interior walls, columns, soffits and ceilings in interior parking structures.

MasterEmaco S 488

MasterEmaco S 488 is a cementitious pre- bagged ready-to-use structural repair mortar in powder form. When mixed with the correct amount of water, it produces a thixotropic, high strength repair mortar, reinforced with acrylic fibres. It possesses excellent bond characteristics to steel reinforcement and to concrete. MasterEmaco S 488 mortar is shrinkage compensated. It has low permeability and is extremely durable. MasterEmaco S 488 contains no metallic aggregate and is chloride free. MasterEmaco S 488 is formulated for sprayed or trowelled applications, in thicknesses up to 50mm in one layer by hand application.

MasterProtect 1855

MasterProtect 1855 is a single component, water based, protective coating formulated from high performance ester/acrylic polymers, able to be applied even upon green concrete at 24 hours after placing. When cured, MasterProtect 1855 provides excellent abrasion and chemical, including acid, resistance.

MasterEmaco S 466

MasterEmaco S 466 is a high strength precision concrete, requiring only the on-site addition of water to provide a free flowing concrete ideally suited for placing in nominal thicknesses of 40mm and above. When mixed, applied and cured in accordance with the manufacturers instructions, MasterEmaco S 466 produces a free flowing precision concrete free from segregation and bleeding. MasterEmaco S 466 is a pre-packaged blend of Portland cement, carefully graded natural aggregate, specially selected sands, fillers, shrinkage control agents and fluidifiers. When mixed with the stated amount of water it produces a free flowing, cohesive, precision concrete that hardens to produce a dense, durable surface.

MasterBrace ADH 1414

MasterBrace ADH 1414 is a permanent epoxy adhesive for internal or external bonding of renderings, granolithic toppings, and concrete to concrete. It tolerates a degree of moisture before and during curing and is insoluble when cured. The ultimate bond strength is greater than the tensile strength of concrete. MasterBrace ADH 1414 does not shrink and provides an even and stress-free bond.

MasterProtect 185

MasterProtect 185 is a protective high build epoxy resin coating specifically developed to protect concrete. Supplied as a two-component system comprising pigmented base and a hardener in 1:1 by volume to produce an easily sprayable and chemical resistant finish. It is solvent free and can be used with safety in small rooms or tanks without the need to provide special ventilation. MasterProtect 185 coatings will not support the growth of bacteria.

MasterEmaco 8100 AP

MasterEmaco 8100 AP is a single component, solvent borne zinc rich epoxy primer, providing active galvanic protection to steel. It is a thick grey liquid of paint-like consistency, recommended for use where chloride induced attack on steel and concrete is involved.

MasterEmaco S 423

MasterEmaco S 423 is a combination of Portland cement, well graded sands and aggregates and special additives to improve physical, and installation properties and reduce the possibility of shrinkage cracks When mixed with water MasterEmaco S 423 produces a flowable micro concrete ideally suited to poured/cast applications at 25-150mm thickness (volume dependent).

MasterEmaco S 442

MasterEmaco S 442 is a combination of Portland cement, well graded sands, specially selected fibres and additives formulated to reduce the possibility of shrinkage cracks, and to improve physical and application properties. When mixed with water MasterEmaco S 442 produces a thixotropic repair mortar, suited to hand and #spray application.

MasterEmaco P 5000AP

MasterEmaco P 5000AP active primer, not only reinstates a high pH environment it also contains active corrosion inhibiting additives for the protection of reinforcement steel. It can also be used as an adhesive bonding slurry for subsequent repair mortars. MasterEmaco P 5000AP is a ready-to-use material that contains portland cement, well graded fine fillers, re-dispersible powder and special additives. When mixed with water, it forms a slurry that can be applied by brush to the clean exposed reinforcement, or directly on the dampened, prepared concrete substrate when used as a bonding coat.

MasterEmaco S 443

MasterEmaco S 443 is a combination of Portland cement, well graded sands, aggregates and special additives to reduce the possibility of shrinkage cracks and to improve physical, and installation properties When mixed with water MasterEmaco S 443 produces a flowable micro concrete ideally suited to cast/poured applications

MasterEmaco FL 100

MasterEmaco FL 100 - 5-10mm limestone aggregate is used with MasterEmaco cement based repair mortars and MasterFlow cement based grouts.

MasterBrace ADH 4000

MasterBrace ADH 4000 is the adhesive for the MasterBrace LAM system. The MasterBrace LAM system is based on ready to use carbon fibre laminate (pultruded plate) that provides high tensile strength combined with light- weight and is used for flexural reinforcement of concrete and other building materials.

(+971) 4 4214636

info@revaintl.comOffice 407, Building 12, Bay Square,
Business Bay – Downtown Dubai, UAE

Reva International is a global trading and distribution company with a network of offices in Africa, Asia, Gulf, and Europe. We leverage our worldwide presence along with sourcing and marketing competencies to deliver what we promise. We deal in Construction Chemical Products.